Posted by Lambert Blikman on August 14, 1997 at 12:28:26:

Hi there, I've heard that the WSA sound also can be used for the KN 3000. 
Has anybody expirienced this ? The format is different, give a mail.......... 

=====================================================================

Posted by Siegfried on August 14, 1997 at 14:36:17:

In Reply to: WSA sounds for the KN3000 ??? posted by Lambert Blikman on 
August 14, 1997 at 12:28:26:


: Hi there, I've heard that the WSA sound also can be used for the KN 3000. 
Has anybody expirienced this ? The format is different, give a mail..........

Yes, it is possible. You have to convert the WSA files to a KN3000 format. 
I have written a program to convert the sounds. Not all the WSA sounds can 
be used on a KN3000. 

=====================================================================

Posted by Bjoern Bojahr, Germany on August 14, 1997 at 16:06:44:

In Reply to: Re: WSA sounds for the KN3000 ??? posted by Lambert Blikman 
on August 14, 1997 at 15:13:07:

WSA Sounds on the KN3000? I don't think that the KN3000 can read Physical-
Modeling-Sounds! There are total different samples! Where is the Effect-Processor?
Has the KN3000 an 24dB HPF?  I don't know the KN3000 (I've only read about it) 
but can you tell me a bit more about this soundconverting?

Thanks

Bjoern 

=====================================================================

Posted by Bruce on August 15, 1997 at 00:50:52:

In Reply to: Re: WSA sounds for the KN3000 ??? posted by Bjoern Bojahr, 
Germany on August 14, 1997 at 16:06:44:

: WSA Sounds on the KN3000? I don't think that the KN3000 can read Physical-
: Modeling-Sounds!
: There are total different samples! Where is the Effect-Processor?
: Has the KN3000 an 24dB HPF?
: I don't know the KN3000 (I've only read about it) but can you tell me
: a bit more about this soundconverting?

: Thanks

: Bjoern

Hi Bjoern,

The KN3000 and the WSA1 have a lot in common. The filters
are the same on both. There's only one DSP on the
the KN3000, so you can't use the series/parallel
effects routing as you can on the the WSA1.The 
PCM samples in the ROM banks of the WSA1 seem to be
identical(for the most part)with those on the KN3000.
That's why a format conversion routine would allow the
PCM samples to used interchangeably.(I have both the WSA1
and the KN3000)The "accoustic modeled sounds can't be
played on the KN3000 because there is no corresponding
waveform sample.